Top 3 Hot Water Maintenance Procedures That Should Be Followed

Plumberalexandria Water-Heater-Maintenance (1)

Each day, our water heater operates and provides as with heated water to ensure that we can clean our dishes and wash our clothes appropriately during cold weather conditions. In return for the service they give to us, is a regular maintenance to ensure that operates properly, avoiding the chances of malfunctions as we demand its purpose. Most of the time, upon purchasing a water heater unit, along with it is a set of guidelines on how to operate the unit and the maintenance procedures that should be followed when conducting a unit check-up.

This article presents the top 3 things to do to keep our heater from heating, here are the following:

Flush the tank

Your water heater tank will become a liability most especially if you don’t maintain it well. Over time, sediments will accumulate and mixed with the water. When this occurs, the water becomes cloudy in appearance and its smell turns into a metallic-like odour. As the water flows through your pipes, there is a possibility that it will clog due to the sediments that cling to the screens as they try to pass through it. When this is left unattended, your water heater unit will produce inconsistent temperature. It is advisable for water heater uses to clean and flush down water along with sediments every six months to avert heater problems and malfunctions in the future.

Check your pressure valve

Similar to a fuse, T&P valve (Temperature and Pressure Valve) is regarded as secured valve for both electric and gas type water heater systems. If there is intolerable pressure within the tank, the T&P valve automatically opens and instantly frees the pressure to stave off the chances of an explosion.

With that being said, T&P valve should always be on your radar so that it will function as soon as there is any sign of excessive pressure. This should be regularly maintained as plumbing disaster might occur without notice. When you try to check this valve, it is best to turn off the power supply to avert any trouble.

Examine the sacrificial anode rod

Thanks to this piece in our heater system, our unit is saved from the dreadful effects of corrosion. Additionally, when corrosion spreads through the unit, other parts of it will likely to wear off. Typically, anode rods can be aluminium, zinc or magnesium so when you try to purchase a heater, try to consider what the anode rod is made of because it will be the one to determine the lifespan of your water heater system. Furthermore, this part should be replaced once in three to four years to salvage your tank from corrosion and other factors that will damage your appliance.

With this top 3 tips to maintain your unit, you save so much money intended for repairs and unit replacement. Our water heater tries its best to provide us quality service so it would be nice for us to return the favour take good care on the unit for them to last more than its expected maximum lifespan.