6 Effective Techniques for Fixing Leaky Water Heaters

Plumberalexandria Leaky water heaters

When your water heaters at home are leaking, they will give you further dilemma. They might be the cause why you would have to suffer paying your high water heating bills especially when these homeowners are determined to save money on the utility bills. Aside from that, when the gas pipe used to carry the fuel for your water heater when it is gas-powered leaks, it might cause an explosion. Upon encountering this plight, we tend to do everything we can just to fix them rather that entertaining the idea of investing for a new unit. To help you fix this predicament, here are some tips to serve as your guide.

1. Top leaks

  • Pressure relief valve

Your pressure relief valve may leak as well, and most of the times, this is because of some debris and hindrances that prevent it from properly doing its job in releasing pressure and avoiding explosions. This commonly happens in old homes with old models of water heaters. When these water heater tanks are accumulated with various sediments and debris, they may accumulate your pressure relief valve as well. You would need to remove this debris, because if not, it might lead to an unexpected explosion. You can remove this debris by tugging the valve tub. You will need to place a bucket below the overflow tube to avoid water spillage. Drain the tank and the sediments will be eventually removed thus, removing any hindrance in pressure relief valve. If removing the sediments do not solve the problem, then it might be wise to replace the mechanism’s part.

  • Inlet and outlet pipes

When your inlet and outlet pipes are leaking, it might be caused by improper and loose pipe connections. You might just tighten this with the help of the wrench. But tightening does not always solve this predicament. Sometimes, it leaks because the pipe itself is damaged. The only solution for this is to replace the leaky pipes before it drags your utility bills or create an explosion.

2. Bottom leaks

  • Overflow pipe

Overflow pipe tends to release an amount of water when the pressure is too high that the tank could no longer handle. In this case, the pressure relief valve will release the water into the overflow pipe to avoid an explosion. To ensure that excess pressure causes this problem, you can turn the water heater back on and set the thermostat to a very low setting.

  • Drain valve

Just like the pressure relief valve, leakage in the drain valve might be as well cause by insignificant debris and sharp objects. Draining them and trying to tighten all the loose connections might solve the predicament. Screwing the hose nozzle and its end cap might help get rid of leakage as well.

  • Heating element gasket

When the leakage spotted in the heating element, there is no way to fix this by draining or tightening. Water heating element directly demands a replacement. They cannot easily be spotted by homeowners as they are insulated and secured. When its seals are lost, leakage would definitely take place.

  • Water heater tank

Water heaters, especially when already used excessively for many years, might already be corroded. The corrosion and rust that might probably be surrounding it may cause it to leak, and the only way to solve this is to replace the tank as it can never be restored by any glue substance.