4 Common Water Pressure Issues and How to Solve Them

plumberalexandria water pressure

A water heating unit is as important as any other fixture in the plumbing system. In addition, it is a staple and essential appliance in every home. In fact, the heating system is at work all day round regardless of the temperature outside. In fact, the only probable time when the unit is turned off is when the family is away on vacation and there is no one inside the residence.

Because of this, it is not unheard of that the heating system experiences countless recurring problems throughout its service time. Plumbing professionals have found out that there are a number of common problems that are occurring again and again in different homes regarding their water heating facility. They have advised homeowners time and time again that arming themselves with the basic knowledge pertaining to these issues will help them in more ways than one. For instance, knowing what will make the problems worse will help them be watchful of their actions to prevent such situations. Also, knowing the signs of the commonly experience faults in the heating unit will help them keep better record on the health of their appliance and have quicker response whenever something unusual happens therefore reducing their repair costs and the damage that the plumber will need to fix. Here are 5 of the most common problems and how to find solutions to them:

  • Sediment Build-Up

One of the most recurrent water heating unit issue is the sediment build-up. To make things worse, when this issue is not properly dealt with at the soonest, it will branch out and trigger different issues to add to the trouble. Sediments accumulated along the walls of the pipelines will hinder the water flow as the sediments get thicker and thicker. Also, when these reacts with the metal composition of the pipes, it jumpstarts to the corrosion process.

This problem often happens when heating systems are too old. This is why the most effective solution for this problem is to have the system altered completely by either relining the damaged sections of the pipe or to replace the entire pipeline using the traditional method.

  • T&P Valve Issues

The temperature and pressure relief valve is essential to the water heating system. This is a safety valve that prevents the water pressure inside the tank from being too strong that it damages the entire system. When the water pressure inside the tank becomes too strong, it will only be a matter of time before the tank bursts. As a solution, make it a point to check the valve regularly when it is having problems; replace the unit immediately to prevent the problem from getting worse.

  • High or Low Water Heater Temperature

Another common problem that a homeowner can experience is water heating problems. Ether from too much heating or less insulation, the problem is usually in the water tank thermostat. If this is your problem, homeowners can simply adjust the water tank thermostat to the recommended temperature – between 115 to 120 degrees. However, depending on the water source of the residential space, temperature below 130 degrees Fahrenheit might not be enough.

  • Unusual Clattering from the Water Tank

Clattering sounds that come from the water tank is not a normal occurrence. In fact, this only happens when the tank or the water heating system is under duress. Clattering sound usually happens when the gas bubbles affecting the system are popping and is creating the thumping sound. The noises are produced when the gas bubbles are released from under the sediment build-up.