4 Basic Tips for Plumbing Maintenance

plumberalexandria plumbing maintenance

The effectiveness of any plumbing system and all its components is directly influenced by the condition it is in. you cannot expect a faulty and unkempt plumbing system to be working in tip-top condition and efficiency. What makes matters worse is that the fixture that encounters most problems is the same fixture that is usually overlooked in upkeep and maintenance. This fixture is the pipe. This could be caused by the obvious fact that most of the pipelining are buried underground and cannot be accessed directly unlike the taps, drains, showerheads and other plumbing fixtures that are easily within reach. Here in this article, you will be introduced to 4 of the basic and easiest plumbing maintenance methods. Those are:

1. Pipe Camera Inspection

Pipe body inspection is an important part of cleaning and maintaining the well-being of the pipelines. Although you will not have any problem in DIY inspection of the pipe if it is on the surface, what will happen if it is buried and there is no way for you to check for leaks? That is where pipe cameras become handy. You can pick up pipe camera rods from your local hardware store. However, this method does not stop there. Once you have the camera, you will need knowledge on how to deal and interpret the feeds from the camera. After interpreting, come up with the best type of solution to the problem or preventive measures to reassure pipe health. In most cases, it is best if you hire professional plumbers to do the job for you. Not only will this lessen your expenses because then you will not need to buy a pipe camera, this will also make the job easier and the assessment, as well as the next course of action, better since professional plumbers have the expertise and experience in dealing with these problems.

2. Chemical-based Solution

Some homeowners are under the wrong impression that chemical cleaners work better and are more helpful for the pipe and plumbing system. Although, with small-scale problems, they are useful and actually efficient for the job, they cannot eliminate thick and solid blockages. They might look very efficient to use since they only have to be poured down the drain, sometimes they cause more problem than give solutions. Chemicals have the property to corrode the pipe and break it.
For root intrusion, chemical products prove to be more useful. Professional plumbers use copper sulphate to inhibit the growth of roots inside the pipe. The chemical creates a blanket around the pipe and within contact, the roots die out.

3. Rodding

Rodding tools are in the form of plumbing snakes. This device is fed through the pipe in order to clean the pipeline by cutting or grinding anything in the interior of the pipe. The rodding tool has detachable heads that can adapt to the needs of the cleaning process. This tool usually comes in different heads that are useful for cutting off intruding roots from the outside of the pipe to grinding sediments and rocks to flush the tiny pieces out of the pipe.

4. Water Jet Cleaning

A water jet is a device that clears the obstructed pipe using water pressure. The nozzle of the water jet produces water at 2000 to 6000 psi making it the best tool to flush away and get rid of oil, grease and other substances that are way too tricky for other tools to remove. The only setback with this method is that it is quite costly.